Monday, April 23, 2012

Alva Cloth Diapers: Individual Reviews


My Alvas arrived a few days ago, and I've gotten through most of them once. Here are my first impressions.

Background info: my son is about 22lbs, 7 months old, and something of a heavy wetter. One microfiber insert will not do! Up until now we've primarily used BumGenius 4.0s, with the occasional GMD prefold in a Thirsties or Econobum or Flip cover. At the moment we are using disposables at night, just because the bulk of several inserts is ridiculous and still not guaranteed not to leak, especially on nights when he nurses more than once. I'm on a quest to find something that will last up to 3 hours without leaking and without being obnoxiously bulky.

Alvas use both fleece and suedecloth inners; check out the Alva Facebook page for a note about which diapers use which materials. All of the diapers below have suedecloth innersexcept for the animal print (E5), which says it is fleece. It looks and feels exactly like suedecloth, so I don't know if that's what their fleece looks like, or if Alva switched to suedecloth on that one.

3.0 Minky Diaper D13


Not quite cow, not quite dalmation... snowflake appaloosa? Whatever, they're little spots! This one is slightly off-white with with black spots.
This your typical 3.0 pocket diaper. Three rise settings, a hip snap, two upper snaps, with snaps on the flap in case you have a super skinny baby. The pocket opening is in the back, with elastic on both the waterproof outer and inner suedecloth layer. (See yellow diaper below.) This one came with a single microfiber insert.
I really like the minky fabric! It's soft, fuzzy, and cute. My child is somewhat between the largest and single snap-down size, but at a chunky 22 lbs he definitely has a while before this diaper is too small!
I paired the microfiber insert that came with it along with a bamboo 3-layer insert and it easily held up to the 2 hour mark with no leaks or wicking, though it was slightly bulky.

3.0 Minky Diaper M11


This one has hamsters(?), alligators, and chicks on it. I don't think they cut the pattern in any particular way to show it off. The one on the website shows the hamster-like critter up front. There may even be another animal in the blue circle, I don't know.

This one is exactly like the spotted diaper above. Only one change; I used a single 4-layer bamboo insert instead of the microfiber insert that came with it. At the 2-hour mark it was soaked completely through, and the minky fabric was damp around his legs, as was the tag inside. Had he been in his bouncer this definitely would have wicked onto his pants. If you have a heavy wetter you'll probably need an extra insert.

3.0 Yellow Diaper B01




This diaper is BRIGHT!
Again, this is built just like the two minky diapers above, with a suedecloth lining. I initially did not like the double elastic, since it bunches up the inserts as you are inserting them (and is even worse with two) but I quickly got used to it.
Another big fear I had with the 3.0 series of Alvas was the lack of a waterproof liner across the inside front. However, he's had no leaks or wicking all day, nor has the front rolled down at all.

4.0 Colored Snap Double Gussett CB06:




Currently this color is not available, though the one I really wanted is! :(
This is Alva's newest 4.0 diaper. It has cool colored snaps, a double gussett, a snap on the insert, and a good inch and a half waterproof lining across the inner front to help avoid leaks and wicking up front. My son is past the runny poo stage, so for now the gussetts don't do a whole lot. The suedecloth outside of the gussetts was still wet when I took it off, so I don't think it will prevent any wicking to the sides, either.

Bamboo Diaper + 1 insert BN08



The bamboo diapers are the more expensive ones on the site. One insert diapers are $8, and two insert diapers are $10. This particular diaper came with one insert, which was a 4-layer insert; three layers of bamboo rayon and one layer of microfiber.
The bamboo inner is silky smooth and soft. The outer waterproof layer on this diaper is also thinner, and even feels silkier than the other diapers. This makes this diaper feel very soft and luxurious! For $8 it feels like a steal.
When fastening the diaper I noticed it feels much stretchier than other diapers, in fact it's almost comparable to the stretchy tabs on a disposable. This is probably because both the bamboo and outer layer are stretchy; the suedecloth inners on the other diapers are not stretchy at all. I often feel like cloth diapers on my son are too tight around the waist, when he's sitting on his own there is often a roll of his belly hanging over the diaper- it looks uncomfortable! I haven't figured out if the stretchiness of these makes them any more comfortable for him, but if that's an issue for you, it may be worth looking into.
Since the inner is bamboo, it is absorbent, unlike suedecloth, so keep that in mind when stuffing.
However, there are some drawbacks. The bamboo inner is super soft, but is not stay-dry, so your child will feel the wetness. Also, if you line dry your covers, these take a VERY long time to dry. The thinner outer layer doesn't feel very rugged, which makes me even more hesitant to throw them in the dryer (even on low!) to speed up drying time.
Finally, on my diaper, one of the hip snaps wouldn't stay snapped, and another felt very loose.

Bamboo diaper + 2 inserts BB6



This diaper came with two 3-layer bamboo inserts, but otherwise is identical to the one above.
One thing to note about this color: on the website, it appears to be a darker, slightly navy/twilight color of blue. However, it is actually a very bright blue, the same color as the color snap diaper above.

Animal Print E5


I was DYING to get my hands on this print, for some reason. The same animals also come on a green or a blue background but I wanted the white! Like the other diapers, the outer layer is thinner and softer than other brands of diapers I've used.
This diaper is slightly different than the others. It's one of the few (of the ones I bought) that have the Alva label on the hip.

The label says the inner is 'fleece' but it looks and feels exactly like the suedecloth on all the other diapers. This is also the only diaper that doesn't have elastic on the inner lining. Instead, as you can see, there is a large flap under which you can tuck the insert.
I have seen a very similar diaper advertised as "Kawaii Goodnight", so if you are looking for this particular style, it may be worth a shot to choose the colors that are available in the Kawaii Goodnights. I don't have a Goodnight to compare to, but the Alva does NOT have a strip of waterproofing across the top front. The Alva only comes with one microfiber insert, not two.
I used this one with a single microfiber insert and it wicked pretty quickly at the legs.

3.0 Minky Diaper E15

This is the only diaper that hasn't been worn yet, but it is the same as the other minky 3.0 diapers, except it has a label on the hip. Oddly enough, though it's in the E series, it does not have the pocket opening like the animal print above. These are the only two E series I have, so I don't know which is the exception. (See the note about the Kawaii Goodnights above.)
The insert with this one had an odd little brown spot (you can see it in the image) which I don't think washed out. It was also made slightly different than the others; it was a whiter white and had a dense serged edge on it. I haven't used these inserts enough to notice if this one is any more absorbent than the others.

Alva Leggings:



Not a diaper! The images on the website aren't very large so I thought I'd include one here. For $3.69 these seemed like a deal and are super cute as well. Unfortunately I have no idea what they are made of (one forum claims cotton/lycra/spandex) and I also managed to shrink them the first time through the wash. My fingers are crossed that it will still fit, but we're getting into warmer weather so I'm afraid I may not get much use out of these.
As cute as they are, they aren't particularly soft.



Alva Cloth Diapers and Bamboo Inserts

I just got my order of Alva Baby Diapers! It's review time!

I ordered these from http://alvababy.com. These run from $4.95 for a basic pocket diaper to $10 for a  bamboo diaper; a huge savings from the usual $15 to even $30(!!!) you see for other brands. These are pocket diapers, which means an outer layer of waterproof material sewn to an inner layer of fleece or suedecloth, between which you stuff your absorbent material- usually microfiber, cotton, hemp, or bamboo. Most pockets on the market come with one or two inserts.

Shipping is free, but be prepared to wait 3 weeks or more. Mine arrived in a bag, with each diaper individually wrapped. Many people join co-ops, where lots of people get together on a large order. The more you order, the cheaper the price!

The website is not very descriptive of what you get, with Engrish all over the place. For help figuring out what I'd really be getting, I relied heavily upon the Loving Alva Diapers Facebook page; specifically the notes.
This link: Describes what each series material is made of; minky vs PUL outers, suedecloth vs fleece inners.
This link: Describes the differences between the main diaper types sold by Alva.

Edited to include links to updates!


General observations:

Outer Layer:
The outer waterproof layer on these is soft, not stiff like some other diapers I've tried, nor is it 'sticky' on the inside. I don't know what causes the stickiness! I have had one out of 18 BumGenius diapers become sticky inside, and my lone FuzziBunz is also sticky, which makes stuffing difficult.
I am not sure whether these are "PUL" or "TPU", but reading about TPU makes me think these might be it. Most cloth diapering advocates say you should wash on hot, but the washing instructions here say to wash on warm. The hot temperatures may damage or degrade the outer layer more quickly. You'll also want to line-dry the covers to increase their lifespan.

Suedecloth Inners:
Time will tell if the suedecloth inners become pilly or not. Suedecloth tends to wear much better than fleece, however I've seen suedecloth get pilly. My previously mentioned BumGenius diapers were all ordered around the same time and all received approximately the same amount of washes, yet some have pilled and some have not. I've even seen different parts of the same diaper pill differently.
Personally, I prefer suedecloth, because it doesn't pill nearly as much as fleece. Some babies may have a sensitivity to it, so try one out before ordering a whole bunch. I love the stay-dry feeling; occasionally I've taken off a diaper and wondered, "Did he even pee?" only to find the inserts soaked through.
One problem I've been running into a lot lately is when the diaper is soaked, the suedecloth will wick liquid to the outside.

Stuffing:
I only have one FuzziBunz to compare these to, but the Alvas are nice and wide, making stuffing them a breeze. My FB is a pain to stuff, because my hand + two inserts is a tight fit, not to mention the sticky PUL on one side and the non-slippery fleece on the other!

Overall Quality:
I am VERY impressed with these diapers. For 1/3 of the price of top brands of diapers you can't ask for better. Here and there a seam is a little crooked, and one of the inserts had an odd colored spot on it. Four of the bamboo inserts I received had a very small burn/melty mark on the edge. Honestly, for a $2.50 insert I'll let a lot slide! Not to mention there is a wide range of patterns and colors to choose from that you don't get from many diaper brands.

Bamboo 3-layer Inserts:

I ordered some extra 3-layer bamboo inserts. I've heard so much about the absorbency and lack of odor that I had to try them. 
What I found out about bamboo recently has changed my opinion on these somewhat. These inserts are slinky, smooth, and soft- in fact they're technically Rayon. Check out this link for more info about bamboo rayon.
You may have heard that bamboo requires many washes to get the natural oils out and to become absorbent? These inserts don't seem to require this. After a single wash, these were easily as absorbent as the microfiber inserts. Test them out yourself before boiling them or washing them 10 times!
These do not have tags on them.


My son is 7 months old and I think he's what you'd call a heavy wetter. By the two-hour mark in a single microfiber insert, he'll have soaked through it. Usually the suedecloth will wick at the legs and onto his pants, especially if he's in his bouncer or the car seat or sitting.
I was hopeful that a single bamboo insert would be asborbent enough for him, but it appears it is not. However, paired with a microfiber insert, these do perfectly fine. They are somewhat heavy, even when not wet. They also tend to bunch up between his legs. The fabric is slinky/slippery so I wonder if they will shift around when he starts crawling. At any rate, while I really want to love these and they are perfectly fine inserts, I don't think they're magic bullet I was looking for.

Bamboo 4-layer inserts

Some of the bamboo diapers come with one insert and others come with two, so keep an eye on that when you order. The diaper I ordered with a single insert contained a 4-layer insert: three layers of bamboo with a single layer of microfiber. The diaper with two inserts contained two 3-layer bamboo inserts. I didn't know this, so I ended up with a 4-layer insert to compare (which is good, because I was curious.)
Again, the 4-layer insert was not the magic bullet I was hoping for. While it is slightly more absorbent, at the 2-hour mark it was soaked through, and the diaper was wicking at the legs.
The 4-layer inserts have tags, as you can see below.